Flood Prevention

Flood Prevention

  • Waterbug Supervised Under-Carpet sensor for WB800 - W-UC-S
    Add to Cart

    Winland Electronics

    Waterbug Supervised Under-Carpet sensor for WB800 - W-UC-S

    $56.43
    Waterbug Supervised Under-Carpet Sensor - Description Formally the WB0009, additional Supervised Under-Carpet Sensor may be placed under carpet or raised flooring to detect the first appearance of leaking water. Note: Can only be used with...
    WNWUCS
  • Surface Sensor Supervised for use with the WB800 - W-S-S
    Add to Cart

    Winland Electronics

    Surface Sensor Supervised for use with the WB800 - W-S-S

    $39.99
    Winland Waterbug Supervised Leak Sensor - Description Additional Supervised Standard Sensor may be placed on the floor to detect the first appearance of leaking water, or attached to your sump pipe to detect water rising. Additional Supervised...
    WNWSS
  • WaterCop Dual Probe Flood Sensor - WCDFS2
    Add to Cart

    WaterCop

    WaterCop Dual Probe Flood Sensor - WCDFS2

    $79.00
    The WCDFS2 is a twin probe wireless water sensor for use with the WaterCop system. Use these to monitor both under the bathroom vanity and behind the toilet with just one transmitter cutting down on cost.Can be powered by batteries or by the ACA100 power...
    WCDFS2
  • WaterCop Single Probe Flood Sensor - WCDFS1
    Add to Cart

    WaterCop

    WaterCop Single Probe Flood Sensor - WCDFS1

    $71.00
    WaterCop Single Probe Flood Sensor - Description Stop flooding before it becomes a problem with a Watercop system! Watercop sensors can be placed anywhere in your home so that you are fully protected. The following is a list of ideal locations to place...
    WCDFS1
  • WaterCop Control Switch - WCRS100
    Add to Cart

    WaterCop

    WaterCop Control Switch - WCRS100

    $36.10
    The WaterCop RS-100 is a remote switch. Simply mount this near a common exit or entrance to your home and easily turn the water ON and OFF with the push of a button! The RS-100 connects to the WaterCop actuator and valve using CAT5 cabling and RJ45...
    WCRS100
  • WaterBug with Form C Relay Output (M00101040) - WB-200
    Add to Cart

    Winland Electronics

    WaterBug with Form C Relay Output (M00101040) - WB-200

    $68.00
    WNWB200 Waterbug - Description The Water Bug model WB200 operates on 12 or 24 Volt AC/DC and has a form C relay output that can be connected to alarm panels, bells, dialers, etc. The unit can monitor up to as many as six sensors up to hundreds of...
    WNWB200
  • WNM0010106 - (WB1040) Surface Sensor-Unsupervised - W-S-U
    Add to Cart

    Winland Electronics

    WNM0010106 - (WB1040) Surface Sensor-Unsupervised - W-S-U

    $24.79
    WNWB1040 Waterbug Standard Sensor - Description Additional Standard Surface Sensors may be placed on the floor to detect the first appearance of leaking water, or attached to your sump pipe to detect water rising. Ideal for monitoring several...
    WNWSU
  • WaterCop Ready Brass Valve 1 Inch
    Add to Cart

    WaterCop

    WaterCop Ready Brass Valve 1 Inch

    $81.00
    The WaterCop leak sensor and shutoff system uses water leak sensors to detect leaks or floods, which will send a wireless signal back to a shutoff valve to close and cut off the water supply to the leak. This is the WaterCop ready valve which can be...
    WCVLF1
  • WaterCop Ready Brass Valve 3/4 Inch
    Add to Cart

    WaterCop

    WaterCop Ready Brass Valve 3/4 Inch

    $74.00
    The WaterCop leak sensor and shutoff system uses water leak sensors to detect leaks or floods, which will send a wireless signal back to a shutoff valve to close and cut off the water supply to the leak. This is the WaterCop ready valve which can be...
    WCVLF34
  • WaterCop Ready Brass Valve 1/2 Inch
    Add to Cart

    WaterCop

    WaterCop Ready Brass Valve 1/2 Inch

    $66.00
    The WaterCop leak sensor and shutoff system uses water leak sensors to detect leaks or floods, which will send a wireless signal back to a shutoff valve to close and cut off the water supply to the leak. This is the WaterCop ready valve which can be...
    WCVLF12
  • SEN-100-WR-AUTO Wireless Water Sensor for MarCELL With Auto Reset
    Add to Cart

    Emerson

    SEN-100-WR-AUTO Wireless Water Sensor for MarCELL With Auto Reset

    $45.99
    SEN-100-WR-AUTO Wireless Water Sensor for MarCELL With Auto Reset The SEN-100-WR-AUTO is one of the most versatile wireless water sensors on the market. The Water SPuck (short for Sensor Pucks) is made for use with the Marcell-ATT monitoring system. Up...
    SEN-100-WR-AUTO